FVRO-4C11S-7EN - Fuji Electric FVRO-4C11S-7EN AC Drive

FVRO-4C11S-7EN - Fuji Electric FVRO-4C11S-7EN AC Drive | Single Phase 200-240V, 6.4A...

Fuji Electric FVRO-4C11S-7EN AC Drive | Single Phase 200-240V, 6.4A Simple Type: AC Drive

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

General

Base frequency: 50 to 120Hz (in 1Hz steps)
Bias frequency: The bias frequencycan be set from -100 to +100% in Hz.
Capability for voltage dip: When the input voltage drops 165V or more, the inverter can be operated continuously. When the input voltage drops below 165V from rated volt-age, the inverter can be operated for 15ms.
DC injection braking: Startingfrequency: 3Hz (fixed), Brakingcurrent (0 to 100%), Brakingtime ( 0.0 to 30.0s)
Frequency jump control: Jump frequency(3 points) and jump hysteresis width (1 point) can be preset.
Frequency limiter: High and low limits can be set for output frequency between 0 to 100% in Hz
Gain (frequency setting signal): 5VDC or 10VDC gain can be selected.
Maximum output frequency: 50 to 120Hz (in 1Hz steps)
Overload capacity: 150% of rated current for 1 min.
Phases, Voltage,Frequency: Single-phase 200 to 240V 50/60Hz
PID control: PID control function is provided standard.
Protective structure(IEC60529): Closed type IP20
Rated frequency: 50, 60Hz
Restart after momen-tarypower failure: Inverter restarts without causinginverter-trip when
Starting requency: 1 to 6Hz (in 1Hz steps)
Starting torque: 150% or more (at 6Hz)
Torque boost: Manual settingbycode 0 to 31.(settingfor variable torque load available)
Voltage/freq.Characteristic: Output voltage proportional to input voltage. Base frequencyadjustable from 50 to 120Hz.
Voltage/frequency variations: Voltage: +10% to -10%, Frequency: +5% to -5%